1. Conico Wireless Ip Camera User Manual Pdf
2. Conico Wireless Ip Camera User Manual Panasonic Lx 100 Manual
3. Conico Wireless Ip Camera User Manual

For the Remote shooting, stabilize the camera with a tripod or using some other method, and then connect the camera to the computer.
The connection and setting methods vary depending on the model.

When using the ILCE-1

. 1 x Baby Unit (Camera). 1 x Power adapter for Parent Unit. 1 x Power adapter for Baby Unit. 1 x Stargrip In multi-camera packs, you will find one or more additional Camera Units with power adapters. +491808 938 802 (Europe) E-mail: motorola-mbp@tdm.de On the Web: www.motorolahome.com. 10 3.3WatchaCamera’sLiveVideo Toviewacamera’slivevideo,touchapreviewpicture.Initialdisplaywillshowanavigationbar withButtonsofrecord,snapshot,microphone,speaker.

Set up an effective video monitoring system within minutes! IP Camera Viewer allows you to view live video from your USB or IP cameras on your PC. Use any USB or IP camera is to keep an eye on your home, office, parking area or anywhere you need security. View video from multiple IP cameras directly to your computer. Currently more than 2000. Please follow the steps in the video to install and connect your wireless camera.

You can connect the camera via USB using a USB cable, wired LAN connection, or wireless W-Fi connection.

1. On the camera, perform the following setting.

   • MENU → (Network) → [Smartphone Connect] → [Smartphone Connection] → [Off]
   • MENU → (Network) → [Transfer/Remote] → [PC Remote Function] → [PC Remote] → [On]

2. On the camera, select [PC Remote Cnct Method] from the following options.

   [USB]

   Connect the camera and computer using the supplied USB cable.

   [Wired LAN]

   Connect the camera and computer using a general LAN cable sold in the market. After connecting, perform pairing of the camera with the computer.

   1. Connect the camera and computer or switching hub using a LAN cable.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      On the camera, set [Connect without Pairing] to [Enable] to connect without pairing.

   [Wi-Fi Direct]

   Connect the camera and computer using Wi-Fi without passing through an access point.

   1. Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the camera.
   2. Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.

   [Wi-Fi Access Point]

   Connect the camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer.

   1. Select (Network) → [Wi-Fi] → [WPS Push] or [Access Point Set.] to connect the camera and computer to the same access point.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      On the camera, set [Connect without Pairing] to [Enable] to connect without pairing.

3. On the computer, launch Remote .

4. In the Device selection window, select a camera to use for Remote Shooting by double clicking.

When using the ILCE-7SM3, ILME-FX3

You can connect the camera via USB using a USB cable or via a wireless Wi-Fi connection.

1. On the camera, perform the following setting.

   • MENU → (Network) → [Transfer/Remote] → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
   • MENU → (Network) → [Transfer/Remote] → [PC Remote Function] → [PC Remote] → [On]

2. On the camera, select [PC Remote Cnct Method] from the following options.

   [USB]

   Connect the camera and computer using the supplied USB cable.

   [Wi-Fi Direct]

   Connect the camera and computer using Wi-Fi without passing through an access point.

   1. Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the camera.
   2. Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.

   [Wi-Fi Access Point]

   Connect the camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer.

   1. Select (Network) → [Wi-Fi] → [WPS Push] or [Access Point Set.] to connect the camera and computer to the same access point.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.

3. On the computer, launch Remote.

4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.

When using the ILCE-9M2/7RM4A/7RM4/7C

You can connect the camera via USB using a USB cable, wired LAN connection*, or wireless W-Fi connection.
* Supported devices: ILCE-9M2

1. On the camera, perform the following setting.

   • MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
   • MENU → (Network) → [PC Remote Function] → [PC Remote] → [On]

2. On the camera, select [PC Remote Cnct Method] from the following options.

   [USB]

   Connect the camera and computer using the supplied USB cable.

   [Wired LAN] (ILCE-9M2 only)

   Connect the camera and computer using a general LAN cable sold in the market. After connecting, perform pairing of the camera with the computer.

   1. Connect the camera and computer or switching hub using a LAN cable.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

   [Wi-Fi Direct]

   Connect the camera and computer using Wi-Fi without passing through an access point.

   1. Select [PC Remote Function] → [Wi-Fi Direct Info.] to display an SSID and password of the camera.
   2. Perform a Wi-Fi connection to the camera from the computer using the displayed SSID and password.

   [Wi-Fi Access Point]

   Connect the camera and computer using Wi-Fi via an access point. It is necessary to perform pairing of the camera and computer.

   1. Select (Network) → [Wi-Fi Settings] → [WPS Push] or [Access Point Set.] to connect the camera and computer to the same access point.
   2. Select [PC Remote Function] → [Pairing] to perform pairing of the camera with the Remote application.
      If [Connect without Pairing] is available on the camera, set it to [Enable] to connect without pairing.

3. On the computer, launch Remote.

4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.

When using the ZV-1

Conico Wireless Ip Camera User Manual Pdf

You can connect the camera via USB connection using a USB cable.

1. Use the MENU on the camera to perform the following setting.

   • MENU → (Network) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
   • MENU → (Network) → [PC Remote Function] → [PC Remote] → [On]

2. Connect the camera to the computer using a USB cable.

   “Connecting... ” will appear on the monitor of the camera.

3. On the computer, launch Remote.

4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.

Conico Wireless Ip Camera User Manual Panasonic Lx 100 Manual

When using another camera

Conico Wireless Ip Camera User Manual

You can connect the camera via USB connection using a USB cable.
* The displayed terms may differ depending on the camera.

1. Use the MENU on the camera to perform the following setting.

   • MENU → (Network) / (Wireless) → [Ctrl w/ Smartphone] → [Ctrl w/ Smartphone] → [Off]
   • MENU → (Setup) → [USB Connection] → [PC Remote]

2. Connect the camera to the computer using a USB cable.

   “Connecting... ” will appear on the monitor of the camera.

3. On the computer, launch Remote.

4. If multiple cameras are connected to the computer, select a camera to use for Remote Shooting from the device selection window.